a compact uhf rfid tag antenna design for metallic objects This contribution presents a tag antenna design for identifying metal objects in the European UHF band (865-868 MHz). The antenna consists of a dipole mounted on a thin dielectric which is coupled to two shorted patches mounted on FR4 substrate.
Using NFC on Your IPhone. Hold the NFC tag near your iPhone to read it automatically. If you have an older iPhone, open the Control Center and tap the NFC icon. Move the tag over your phone to activate it. The NFC can .
0 · A compact broadband UHF RFID tag antenna for metallic objects
1 · A compact UHF RFID tag antenna design for metallic objects
Ben Taylor hosts the ABBY award winning Auburn/Opelika This Morning on .
The compact RFID tag antenna with two L-shaped strips and two shorting pins is proposed for .In this paper, a compact broadband RFID (radio frequency identification) tag antenna .The compact RFID tag antenna with two L-shaped strips and two shorting pins is proposed for metallic objects application. The two L-shaped strips are used to increase impedance bandwidth, and the two shorting pins are used to reduce the influence of metallic objects.In this paper, a compact broadband RFID (radio frequency identification) tag antenna mountable on metallic object is proposed.
The compact RFID tag antenna with two L-shaped strips and two shorting pins is proposed for metallic objects application. The two L-shaped strips are used to increase impedance.This contribution presents a tag antenna design for identifying metal objects in the European UHF band (865-868 MHz). The antenna consists of a dipole mounted on a thin dielectric which is coupled to two shorted patches mounted on FR4 substrate.
A small UHF RFID tag for embedded applications in the metallic objects was proposed. Using the high dielectric ceramic as a tag antenna substrate and the folded tag antenna structure reduces the total RFID tag size compared to the conventional tag designs. In this study, a novel compact radio frequency identification (RFID) tag antenna with a combination of a dipole and the double-layer symmetric electromagnetic band gap (DLS-EBG) structure is proposed for metallic objects in ultra-high-frequency (UHF) band.Abstract: A miniaturized tag antenna is presented in this paper, for operating in the RFID UHF American band, in free space or in a metallic environment. The proposed antenna is printed on a single layer FR4 substrate, and designed
In this paper, a tunable compact UHF RFID metal tag is designed based on CPW open stub feed PIFA antenna. By changing the length of the open stub, the impedance of the PIFA antenna could be tuned in a large scale for conjugate impedance matching.In this paper, a small passive UHF RFID tag consisting a loop antenna designed specifically for attaching to metallic objects is presented. Theoretical design steps for this tag design, as well as significant simulation results are included. The results for practical read range performance measurement of this tag are also presented. 1. Introduction
This paper presents a compact microstrip antenna that can be attached to a metallic object to form a passive radio frequency identification (RFID) tag operating in the UHF band.The compact RFID tag antenna with two L-shaped strips and two shorting pins is proposed for metallic objects application. The two L-shaped strips are used to increase impedance bandwidth, and the two shorting pins are used to reduce the influence of metallic objects.In this paper, a compact broadband RFID (radio frequency identification) tag antenna mountable on metallic object is proposed.
The compact RFID tag antenna with two L-shaped strips and two shorting pins is proposed for metallic objects application. The two L-shaped strips are used to increase impedance.This contribution presents a tag antenna design for identifying metal objects in the European UHF band (865-868 MHz). The antenna consists of a dipole mounted on a thin dielectric which is coupled to two shorted patches mounted on FR4 substrate. A small UHF RFID tag for embedded applications in the metallic objects was proposed. Using the high dielectric ceramic as a tag antenna substrate and the folded tag antenna structure reduces the total RFID tag size compared to the conventional tag designs.
In this study, a novel compact radio frequency identification (RFID) tag antenna with a combination of a dipole and the double-layer symmetric electromagnetic band gap (DLS-EBG) structure is proposed for metallic objects in ultra-high-frequency (UHF) band.Abstract: A miniaturized tag antenna is presented in this paper, for operating in the RFID UHF American band, in free space or in a metallic environment. The proposed antenna is printed on a single layer FR4 substrate, and designed In this paper, a tunable compact UHF RFID metal tag is designed based on CPW open stub feed PIFA antenna. By changing the length of the open stub, the impedance of the PIFA antenna could be tuned in a large scale for conjugate impedance matching.In this paper, a small passive UHF RFID tag consisting a loop antenna designed specifically for attaching to metallic objects is presented. Theoretical design steps for this tag design, as well as significant simulation results are included. The results for practical read range performance measurement of this tag are also presented. 1. Introduction
A compact broadband UHF RFID tag antenna for metallic objects
how to read smart card
gemplus expresscard smart card reader from lenovo
Radio station. Auburn, AL, United States, Alabama. (334) 826-2929. [email protected]. tigercountry.net. Closed now.
a compact uhf rfid tag antenna design for metallic objects|A compact UHF RFID tag antenna design for metallic objects